SFP+ connection
Note
If you are using the s2i Transport Layer it is required to configure the network adapter properly. The HPE Ethernet 10Gb 2-port 560SFP+ Adapter and Intel (X710) are configured during installation.
* Some manufacturers encode their cards. Those cards can only be used with the appropriate transceivers.
Example: Intel X710 chipsets only work with Intel or Intel-configured transceivers
Network adapter
The following network adapters are tested with GCT2. The results are shown in the following table.
Vendor Name | Type | Result | S2i TL | Kithara TL |
HPE | HPE Ethernet 10Gb 2-port 560SFP+ Adapter | Fully functional | X | X |
HPE * | HPE Ethernet 10Gb 2-port 562SFP+ Adapter | Not supported yet | ||
Intel * | Intel® Ethernet-Converged-Network-Adapter X710 | Fully functional | X | X |
Myricom | Myricom 2x 10GbE SFP+ low-profile NIC | Only with s2i | X | |
Myricom | Myricom 1x 10GbE SFP+ low-profile NIC | Only with s2i | X | |
Mellanox | NVIDIA Mellanox MCX512A-ACAT ConnectX®-5 EN Network adapter | Only with s2i | X | |
Broadcom | P210P - 2 x 10GbE PCIe NIC | Only with s2i | x | |
Zebra | GevIQ | Fully functional | Zebra TL | |
Installation
Network adapter | |
HPE Ethernet 10Gb 2-port 560SFP+ Adapter | Download and install the following files Download the Wired_dirver_xx and the Wired_PROSet_xx from the Intel Homepage. |
Network adapter with X550 Intel chipset | Download and install the following files Download the Wired_dirver_xx and the Wired_PROSet_xx from the Intel Homepage. |
Network adapter with X710 Intel chipset | Download and install the following files Download the Release_xx from the Intel Homepage. |
Broadcom P210P |
|
Zebra GevIQ | Download and install the following files Download the Release_xx from the Zebra Homepage. |
Transceiver
The following transceivers are tested with the allPIXA evo camera and the network adapters.
Vendor Name | Type | Comment | Camera side | Network adapter side |
Finisar | FTLX8574D3BCL Class 1 21CFR1040:10 | X | X | |
FS | SFP-10GSR-85 | X | X | |
FS | Intel E10GSFPSRX Compatible 10GBASE-SR SFP+ 850nm 300m DOM Duplex LC MMF Transceiver Module | Recommended for Network adapters that are marked with * | X |
RJ45 connection
Network adapter
The following network adapters are tested with GCT2. The results are shown in the following table.
Vendor name | Type | Result | s2i TL | Kithara TL |
Broadcom | P210TP - 2 x 10GBASE-T PCIe NIC | Fully functional | X |
Installation
1. Download the driver file and follow the installation instructions. | Download For the Broadcom Network adapter "P210TP - 2 x 10GBASE-T PCIe NIC", you can find the download files here. |