CXP interface

The following CXP frame grabbers are tested with GCT2. The results are shown in the following table.

If you want to use two cameras with one frame grabber, you may have to configure the frame grabber (see frame grabber manual). Once it is configured correctly, you can connect the cameras as described in chapter Connection and disconnection of Came...

Configure CXP version The data transfer rate depends on the configured CXP standard version. This option can be set with the parameter "Cxp version used" as shown in the following figure. We recommend using the version CSP_Version_2_0. The CSP sta...

Configure an Euresys Coaxlink Use the correct firmware In order to operate a Chromasens CXP camera with an euresys frame grabber, the correct firmware must be loaded on the frame grabber. To check the firmware version and change it if necessa...