Configuration overview

The Corona II illumination generates a bright, stable and homogeneous lighting. The Corona II illumination works with the XLC4 control unit by Chromasens and third party power sources and control units.

Identification number

The Corona II unit can be configured to special needs. Each Corona II unit has an identification number to specify the configuration.

NOTE - When using Combined Tube Light
The identification number and configuration DO NOT represent the Combined Tube Light.
The Combined Tube Light has got a specific identification number and configuration which is different to the scheme shown on this page.
Refer to Combined Tube Light – Configuration when using Combined Tube Light.

NOTE - When using Bright Field Light or Dark Field Light
In addition to the configurations shown on this page there are some special options available for the Bright Field Light and the Dark Field Light.
Refer to Special options for more information.

Breakdown of the identification number

The systematic is broken down using the identification number CP000200-340C-04-2.5-B1B.

Product-ID	–	ID1	ID2	–	ID3	–	ID4	–	ID5	ID6	ID7
CP000200	–	340	C	–	04	–	2.5	–	B	1	B
General identifier for Corona II products		Opticallength of the unit	Reflector type		LED color		Cable length		Connector	Screen options	Heat sink options

Configuration

Available options

For each ID you can choose one out of several options. However there are some limitations in ID1 depending on the choice. The available options from ID2 to ID7 are depending on the choice in ID1.

Note the color code:

	Available without any restrictions
	On request. It may cause longer delivery times
	Not applicable

Optical length of the unit

ID1	Optical length of the unit [mm]
170	170
340	340
510	510
680	680
850	850
1020	1020
1190	1190
1360	1360

Reflector type

ID2	Reflector type	Focal length / Recommended working distance (WD) / Viewing angle
A	Top light	Focal length		60 mm
		WD		50 – 70 mm
		170	340	510	680	850	1020	1190	1360
B	Top light	Focal length		95 mm
		WD		70 – 120 mm
		170	340	510	680	850	1020	1190	1360
C	Top light	Focal length		190 mm
		WD		120 – 300 mm
		170	340	510	680	850	1020	1190	1360
D	Top light	Parallel beam
		WD		> 300 mm
		170	340	510	680	850	1020	1190	1360
H	Bright field
H	Bright field	170	340	510	680	850	1020	1190	1360
T	Tube light
		Viewing angle		0°
		170	340	510	680	850	1020	1190	1360
U	Tube light
		Viewing angle		15°
		170	340	510	680	850	1020	1190	1360

LED color

ID3				LED Color
Top light ID2 (A, B, C, D)	Bright field ID2 (H)	Tube light ID2 (T, U)
Top light ID2 (A, B, C, D)	Bright field ID2 (H)	Full power	Half power
01	01		51	Red (634 nm peak wavelength)
01	01		51	170	340	510	680	850	1020	1190	1360
02	02	02	52	Green (520 nm peak wavelength)
02	02	02	52	170	340	510	680	850	1020	1190	1360
03	03	03	53	Blue (452 nm peak wavelength)
03	03	03	53	170	340	510	680	850	1020	1190	1360
04	04	04	54	Standard white (cool white – 5500 K)
04	04	04	54	170	340	510	680	850	1020	1190	1360
07			07	Daylight (white D50)
07			07	170	340	510	680	850	1020	1190	1360
08	08	08	58	Infrared (850 nm peak wavelength)
08	08	08	58	170	340	510	680	850	1020	1190	1360
09	09	09	59	Infrared (940 nm peak wavelength)
09	09	09	59	170	340	510	680	850	1020	1190	1360
10	10		10
10	10		10	170	340	510	680	850	1020	1190	1360
12	12	12
12	12	12		170	340	510	680	850	1020	1190	1360
30
30				170	340	510	680	850	1020	1190	1360
33
33				170	340	510	680	850	1020	1190	1360
60
60				170	340	510	680	850	1020	1190	1360
61
61				170	340	510	680	850	1020	1190	1360
62
62				170	340	510	680	850	1020	1190	1360
63
63				170	340	510	680	850	1020	1190	1360

Cable length

The cable length is measured from the cable fixing at the housing. When laying the cables of two Corona II segments mention that a different length for the second cable in the middle of the module might be needed.

ID4	Cable length
1.3	1,3 m
1.3	170	340	510	680	850	1020	1190	1360
2.5	2,5 m
2.5	170	340	510	680	850	1020	1190	1360
5	5,0 m
5	170	340	510	680	850	1020	1190	1360
7.5	7,5 m
7.5	170	340	510	680	850	1020	1190	1360
10	10,0 m
10	170	340	510	680	850	1020	1190	1360
15	15,0 m
15	170	340	510	680	850	1020	1190	1360

Connector

ID5	Connector
A	Wire end ferrules For use with other control units, e.g. Gardasoft I²C identification and temperature monitoring are not supported
A	170	340	510	680	850	1020	1190	1360
B	Terminal block for XLC4 control unit
B	170	340	510	680	850	1020	1190	1360

Screen options

ID6	Screen options
Top light ID2 (A, B, C, D)	Bright field ID2 (H)	Tube light ID2 (T, U)
	0		Plexiglas high diffusion bright field only
	0		170	340	510	680	850	1020	1190	1360
1			Glass low diffusion GW55 (standard)
1			170	340	510	680	850	1020	1190	1360
2			Glass polarization GW55 (standard)
2			170	340	510	680	850	1020	1190	1360
3			Plexiglas low diffusion
3			170	340	510	680	850	1020	1190	1360
4			Plexiglas medium diffusion
4			170	340	510	680	850	1020	1190	1360
7			Glass GW4 medium diffusion
7			170	340	510	680	850	1020	1190	1360
		N	No glass Tube light only
		N	170	340	510	680	850	1020	1190	1360
B			Glass GW55 anisotropic foil (30×1°)
B			170	340	510	680	850	1020	1190	1360
C			Plexiglas GW55 anisotropic foil (30×1°)
C			170	340	510	680	850	1020	1190	1360

Heat sink

ID7	Heat sink
A	Passive 50 mm × 10 mm Thermal resistence R_th for 170 mm: 1.63 K/W
A	170	340	510	680	850	1020	1190	1360
B	Passive 50 mm × 40 mm Thermal resistence R_th for 170 mm: 1.52 K/W
B	170	340	510	680	850	1020	1190	1360
C	Passive 90 mm × 100 mm Thermal resistence R_th for 170 mm: 0.80 K/W
C	170	340	510	680	850	1020	1190	1360
L	Fan 50 mm × 47 mm Thermal resistence R_th for 170 mm: 0.38 K/W
L	170	340	510	680	850	1020	1190	1360
F	Fan 50 mm × 67 mm
F	170	340	510	680	850	1020	1190	1360
W	Water up to 2019 50 mm × 18 mm Thermal resistence R_th for 170 mm: 0.25 K/W
W	170	340	510	680	850	1020	1190	1360
H	Water from 2019 50 mm × 18 mm
H	170	340	510	680	850	1020	1190	1360