User Set Control
- 06 Sep 2024
- 1 Minute to read
- Print
- PDF
User Set Control
- Updated on 06 Sep 2024
- 1 Minute to read
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Loaded User Set
Name | LoadedUserSet | Custom |
Description | Specifies the last loaded user set. | |
Interface | String | |
String length | 32 | |
Access mode | Read Only | |
Adjustable while grabbing | Yes | |
Value range | - | |
Default value | Default | |
Availability | ||
Notes | - | |
Error behavior | See the device error code documentation. | |
User Set Selector
Name | UserSetSelector | Standard |
Description | Selects the feature User Set to load, save or configure. | |
Interface | Enumeration | |
Access mode | Read/Write | |
Adjustable while grabbing | Yes | |
Value range | See enum entries table below. | |
Default value | UserSet1 | |
Availability | ||
Notes | - | |
Error behavior | See the device error code documentation. | |
User Set Selector Enum Entries:
Name | Description |
UserSet1 | Selects the UserSet 1 |
UserSet2 | Selects the UserSet 2 |
UserSet3 | Selects the UserSet 3 |
UserSet4 | Selects the UserSet 4 |
UserSet5 | Selects the UserSet 5 |
UserSet6 | Selects the UserSet 6 |
UserSet7 | Selects the UserSet 7 |
UserSet8 | Selects the UserSet 8 |
Default | Selects the Default |
User Set Load
Name | UserSetLoad[UserSetSelector] | Standard |
Description | Loads the User Set specified by UserSetSelector to the device and activates it. | |
Interface | Command | |
Access mode | Read/Write | |
Adjustable while grabbing | No | |
Value range | 1 | |
Default value | 1 | |
Availability | ||
Notes | - | |
Error behavior | See the device error code documentation. | |
User Set Save
Name | UserSetSave[UserSetSelector] | Standard |
Description | Save the current user settings to the selected user set in the non-volatile memory of the device. | |
Interface | Command | |
Access mode | Read/Write | |
Adjustable while grabbing | Yes | |
Value range | 1 | |
Default value | 1 | |
Availability | ||
Notes | Default is Read only. | |
Error behavior | See the device error code documentation. | |
User Set Comment
Name | UserSetComment[UserSetSelector] | Custom |
Description | Leave a comment here to describe the chosen setting. | |
Interface | String | |
String length | 32 | |
Access mode | Read/Write | |
Adjustable while grabbing | Yes | |
Value range | - | |
Default value | Default | |
Availability | ||
Notes | Default user set is Read only. | |
Error behavior | See the device error code documentation. | |
Was this article helpful?