GigE interface

GCT offers two different configurations of the GigE interface Transport Layer to connect and configure a TKH vision group camera. The 10 GigE real-time solution with the Kithara Transport Layer (TKH  GenTL, "C:\Program Files\Chromasens\GCT2\Gen...

Kithara real-time can provide fast image capturing with the GigE Vision standard and can achieve high performance. Running Kithara real-time requires dedicated CPU cores. On those reserved cores, the real-time system is booted, which, from here on, ...

The s2i transport layer does not require an additional license dongle. Note Make sure that the parameters  of your network adapter are set correctly. For more information, see Configure the network adapter . Connect the camera with...

Set network adapter parameter Automatic setting of the parameters Note This configuration of your GigE network adapters is done during the installation of GCT. You will also need it if you want to remove the Kithara TL . You can run this sc...

SFP+ connection Note If you are using the s2i Transport Layer it is required to configure the network adapter properly. The HPE Ethernet 10Gb 2-port 560SFP+ Adapter  and Intel (X710)  are configured during installation.  * Some...