Camera operation - how to

Note  The exposure time must be smaller than the Acquisition Line Time plus an offset. The minimum difference between the Acquisition Line Time and the Exposure Time is camera variant specific. Therefore, query the min and max entries of this...

Internal frame trigger The internal frame trigger provides a continuous signal after each acquired image. In the Configuration window navigate to Acquisition Control → Frame Trigger . Below Internal select the Generate frame trigger con...

Internal line trigger The internal line trigger provides a continuous signal in the frequency of the exposure time. Alternatively, you can set the internal line trigger in the camera feature tree by executing the following step: External line...

The master slave mode synchronizes a master camera with several slave cameras.  The frame trigger and line trigger are only connected to the master camera. The trigger information and additional timing signals are transferred to the slave ca...

Set Color to Color (CCM) The color transformation, or color correction matrix (CCM) can be used to apply a 3×3 or 3×4 correction matrix to the acquired image (Examples @8bit). ...

The camera can be used to trigger up to four different flash controller channels synchronized to their line acquisition. You can acquire several images with different illumination colors simultaneously in a single scan using line-multiplexing. The c...

Create a black-reference with DSNU .

Calculation of PRNU  The following equation describes the calculation of the PRNU  Calibrated_Image = (Raw_Image - DSNU) / PRNU PRNU = (PRNU_Image-DSNU)/Target_Value Calibrated_Image ...

NOTE When modifying the sensor sensitivity the PRNU and DSNU reference data become invalid.  Deactivate DSNU and PRNU references. Create new data sets for shading and black reference. Low speed of the inspected object and good illuminat...

Line Distance (ImageCalibrationLineDistance) What is line distance? allPIXA color linescan cameras have 3 color lines (RGB) to provide the best possible image quality. Therefore, a real sensor value is available for each pixel in all 3 color chann...

Decoding of the first line info block Serial number Structure The serial number consists of two parts. Decoding The decoding of the serial number is: The first part of the serial number S₁ = P_x1 × 256 + P...

Decoding of the each line info block Continuous line count Structure Decoding The decoding of the continuous line count is: C_lc = P_x0Green × 256 + P_x0Blue Example C_lc = 217 × 256 + 127 = 556...

The IO Analyzer allows you to sample the IO input signal of the camera. In a case where you have problems with the input signal, for example with the frame trigger, you can use the IO Analyzer to scan the signals. Setup and scan the IO Analyzer ...

Update your firmware only to change camera functions or fix known bugs. Any firmware update may not only add new features to a camera or fix known issues. It may also replace previous features or change camera characteristics. See firmware rele...