Command VT

Article summary

Did you find this summary helpful?

Thank you for your feedback

Command VT is used to read the values of the supply voltage.

Structure

Command		Notes
CommandID	VT	VT works in all XLC4 operating modes
Parameter	None
Parameter	Value	Description
None		The current values of the supply voltage are queried
Response
	vt, space, input , analog , channel 1, channel 2, channel 3, channel 4
General notes
	The output values are in mV. For the voltage of the LEDs apply a factor of 18,46.

Query	Response	Action
VT	vt 24758,0,1347,1343,1350,1350	Displays the current values: Supply voltage: 24,758 mV Analog input voltage: 0 mV LED voltage at channel 1: 1,347 mV × 18.46 = 24,866 mV LED voltage at channel 2: 1,343 mV × 18.46 = 24,792 mV LED voltage at channel 3: 1,350 mV × 18.46 = 24,921 mV LED voltage at channel 4: 1,350 mV × 18.46 = 24,921 mV
SV 22000,25500	sv 22000,25500	The new values are set: 22000 mV mimimum level 25500 mV maximum level

Query

Response

Action

vt 24758,0,1347,1343,1350,1350

Displays the current values:

Supply voltage: 24,758 mV

Analog input voltage: 0 mV

LED voltage at channel 1: 1,347 mV × 18.46 = 24,866 mV

LED voltage at channel 2: 1,343 mV × 18.46 = 24,792 mV

LED voltage at channel 3: 1,350 mV × 18.46 = 24,921 mV

LED voltage at channel 4: 1,350 mV × 18.46 = 24,921 mV

SV 22000,25500

sv 22000,25500

The new values are set:

Was this article helpful?

Table of contents