Camera operation - how to

Internal frame trigger The internal frame trigger provides a continuous signal after each acquired image. In the Configuration window navigate to Acquisition Control → Frame Trigger . Below Internal select the Generate frame trigger co...

Internal line trigger The internal line trigger provides a continuous signal in the frequency of the Acquisition Line Rate . Alternatively, you can set the internal line trigger in the camera feature tree by executing the following step: ...

Switching the illumination on and off via the camera The following section describes how to connect the camera to the LED Control Unit XCL4 to switch the illumination ON and OFF via the frame active signal. The configuration is used to automaticall...

Set Color to Color (CCM) The color transformation, or color correction matrix (CCM) can be used to apply a 3×3 or 3×4 correction matrix to the acquired image (Examples @8bit). ...

Create a black-reference with DSNU . Dark signal non-uniformity

Calculation of PRNU  The following equation describes the calculation of the PRNU  Calibrated_Image = (Raw_Image - DSNU) / PRNU PRNU = (PRNU_Image-DSNU)/Target_Value Calibrated_Image ...

Line Distance (ImageCalibrationLineDistance) What is line distance? allPIXA color linescan cameras have 3 color lines (RGB) to provide the best possible image quality. Therefore, a real sensor value is available for each pixel in all 3 color chann...

Update your firmware only to change camera functions or fix known bugs. Any firmware update may not only add new features to a camera or fix known issues. It may also replace previous features or change camera characteristics. See firmware rele...

The IO Analyzer allows you to sample the IO input signal of the camera. In a case where you have problems with the input signal, for example with the frame trigger, you can use the IO Analyzer to scan the signals. Setup and scan the IO Analyzer ...